Uses
Monitoring fluid flow in:
- Air Conditioning Systems
- Industrial Refrigeration Systems
- Cooling in Data Centers
- Pools and Spas
- Chillers
- Scrubbers
- Fluid Blending Systems
- Water Treatment Systems
- Natural Gas
Chemical Feed and Pump Controllers
CF-8 Chemical Feed Pump Controller
CF-8 Chemical Feed Pump Controller is a stand-alone controller that automatically actuates a chemical feed pump when primary bulk fluid (water) begins to flow. An example would be to start a chlorine injection pump when the water flow starts and turns the injection pump off when the flow stops. The CF-8 Chemical Feed Pump Controllers are also used to control irrigation chemical feeders and UV lights or Ozone generators on swimming pools
The CF-8 is available with 1 or 2 sets of receptacles. (1 Gang or 2 Gang) The 1 gang model has 1 switched receptacle and 1 always-on receptacle and the 2 gang has 2 receptacles of each. Model CF-8 is available for 120VAC, 50-60 Hz power for pipe sizes from 1 inch to 6 inch.
|
Flow Range |
5 - 80 GPM (18–302 L/m) |
|
Working Temp |
180˚F (82˚C) Maximum |
|
Working Pressure |
100 psig @ 180˚F (466˚F kPa) |
|
Process Connection |
1" NPT |
|
Electrical Switch |
SPDT (single pole double throw), 1/2 hp 13A or Dry Circuit |
|
Enclosure |
NEMA 3R / IP 14 |
Models
|
PIPE SIZE NPT
|
NOMINAL ON/OFF |
SHAFT LENGTH
|
PADDLE NUMBER
|
|
|---|---|---|---|---|
| SWITCH POINT RANGE | Model | |||
| (GPM) | ||||
|
1″
|
5.0 – 3.0 | – | 10512 | CF-8N/-/10512 |
| 9.6 – 7.5 | 1 | 2 | CF-8N/1/2 | |
| 15.4 – 18.0 | 1 | 1 | CF-8N/1/1 | |
|
1 1/2”
|
12.0 – 9.5 | – | 10502 | CF-8N/-/10502 |
| 14.2 – 11.8 | 2 | 3 | CF-8N/2/3 | |
| 19.0 – 13.5 | – | 10570A | CF-8N/-/10570A | |
| 22.5 – 19.0 | 2 | 2 | CF-8N/2/2 | |
| 34.4 – 30.4 | 2 | 1 | CF-8N/2/1 | |
|
2″
|
14.4 – 10.2 | – | 10593 | CF-8N/-/10593 |
| 16.5 – 11.0 | – | 10566 | CF-8N/-/10566 | |
| 25.8 – 21.8 | 2 | 3 | CF-8N/2/3 | |
| 39.8 – 33.6 | 2 | 2 | CF-8N/2/2 | |
| 58.0 – 50.8 | 2 | 1 | CF-8N/2/1 | |
|
3″
|
42.4 – 37.0 | 3 | 3 | CF-8N/3/3 |
| 55.6 – 49.8 | 3 | 2 | CF-8N/3/2 | |
| 80.6 – 65.2 | 3 | 1 | CF-8N/3/1 | |
| * /1G = Two Recepticals: one always on & one switched | ||||
| * /2G = Four Recepticals: two always on & two switched (shown) | ||||
| * Tee not included | ||||
| CF8 Group |
CF-8-1G |
| CF-8-2G | |
| CF-8CR-1G | |
| CF-8CR-2G |
Specs
HYSTERESIS (Δ FLOW RATE TO ACTIVATE/DEACTIVATE SWITCH)
≈ 10% at upper end of flow range
≈ 30% at lower end of flow range
DIFFERENTIAL PRESSURE DROPS ACROSS UNIT
Under normal operating conditions:
≈ 1″–3″ pipe, less than 0.5 psi
≈ 4″–10″ pipe, negligible
WORKING LINE PRESSURE:
50 psi max., operating @ 180˚F 100 psi max. non-operating @ 180˚F Pressure over 50 psi can affect the switch point range
ELECTRICAL SWITCH CHARACTERISTICS
SPDT (single pole double throw) 13A, ½ hp @ 125VAC ½A @ 125VDC (tungsten lamp load) 10,000,000 Operations Median
Diagram
Related Products
-
SDC-101 Pump Run Dry Protection
- Protects pump from dry run
- Time Delay or Manual Override
- Use with any Flow Switch
-
CF-12 Chemical Feed Pump Controller
- Chemical Feed Pump Control
- 120 VAC
- 13A, 120 VAC/SPNO
- Uses Q-12 Flow Switch
- Single or Double Gang
- Pipe Sizes:
3/4″, 1″, 1 1/2″ & 2″ - 1 or 2 Switched Plugs
- 1 or 2 Always On Plugs
- PVC Tee Included
