CF-12 Chemical Feed Pump Controller

Chemical Feed Pump Controller is a stand-alone controller that automatically actuates a chemical feed pump when primary bulk fluid (water) begins to flow.  An example would be to start a chlorine injection pump when the water flow starts and turns the injection pump off when the flow stops.

The CF-12 is available with 1 or 2 sets of receptacles. (1 Gang or 2 Gang)  The 1 gang model has 1 switched receptacle and 1 always-on receptacle and the 2 gang has 2 receptacles of each.   Model CF-12 is available for 120VAC, 50-60 Hz power, for pipe sizes ¾ inch to 2 inch.

Working Temp

180˚F (82˚C) Maximum

Working Pressure

250 psi (1.724 MPa)

Process Connection

3/4" NPT (1/2" Option Available)

Electrical Switch

SPNO (single pole normally open)

Voltages

120V 50/60 Hz

Enclosure

NEMA 3R / IP 14
Installation Instructions
Data Sheet
CF121G
CF122G
CF12CR1G
CF12CR2G
CF-121G
CF-122G
CF-12CR-1G
CF-12CR-2G
cf-12-1g

CF-12CR-1G
CF-12CR-2G

CF-12-1G
CF-12-2G
CF-12CR1G
CF-12CR2G

CF121G
CF122G
CF12CR1G
CF12CR2G

Tag:

Uses

For metering and/or adding chemicals in both continuous and batch fluid systems such as:

  • Well Water
  • Cooling Tower pH/orp Control
  • Drinking Water
  • Metal Plating Make Up Solutions
  • Waste Fluid Processing
  • Boiler Treatment Additives

Models

PRIMARY FLOW LINE SIZE
 PRIMARY FLOW ON/OFF SET POINT (GPM)
CF-12N PART NUMBER
ON OFF
3/4″ 0.9 0.8 CF-12N/0.75/1G/120
1″ 1.1 1 CF-12N /1/1G/120
1 1/2″ 2.8 2.5 CF-12N/1.5/1G/120
2″ 4.9 4.4 CF-12N/2/1G/120
3″ 11 9.9 CF-12N/3/1G/120
4″ 19.6 17.6 CF-12N/4/1G/120
5” 30.6 27.5 CF-12N/5/1G/120
       
* /1G = Two Recepticals: one always on & one switched (shown)
* /2G = Four Recepticals: two always on & two switched
* Tee not included

 

CF12
Group		 CF-12-1G
CF-12-2G
CF-12CR-1G
CF-12CR-2G

Specs

WORKING PRESSURE
250 psi max. continuous

WORKING TEMPERATURE
180˚F max. continuous.

WETTED MATERIALS
Body and Bushing: Noryl® (PP0) (10% glass fibers) PVC Tee Blade: 316 stainless steel Seal: Epoxy

ELECTRICAL SWITCH CHARACTERISTICS
Feed pump motor maximum contact ratings.

VOLTAGE: 120VAC

LOAD TYPE (RESISTIVE): 13A

MOTOR: 1/2 hp

SWITCH CONTACTS: SPNO (single pole normally open)

Diagram

diagram_cf-12

Related Products